EDM-TECHNOLOGY BY HGH

Filters for spark erosion; Electrodes for start hole drilling machines and counter erosion

Bare wire / Brass wire

betterbrass ONE – The revolution for plain brass wires

Coil type	Fill weight	VPE coil	Available tensile strength	Dimensions
K160	8 kg	2	500 / 900 MPa	0,20 / 0,25 / 0,30
K200	16 kg	1	500 / 900 MPa	0,25 / 0,30
K250	25 kg	1	500 / 900 MPa	0,25
K355	45 kg	1	500 / 900 MPa	0,25 / 0,30
P5	5 kg	4	500 / 900 MPa	0,20 / 0,25
P10	10 kg	2	500 / 900 MPa	0,25 / 0,30
P15	20 kg	1	500 / 900 MPa	0,25 / 0,30

megacut® pro TWO – The new second generation brass wire for Japanese machines

Coil type	Fill weight	VPE coil	Available tensile strength	Dimensions
K160	8 kg	2	1000 MPa	0,20 / 0,25 / 0,30
K200	16 kg	1	1000 MPa	0,25 / 0,30
K250	25 kg	1	1000 MPa	0,25
K355	45 kg	1	1000 MPa	0,25 / 0,30
P5	5 kg	4	1000 MPa	0,20 / 0,25
P10	10 kg	2	1000 MPa	0,25 / 0,30
P15	20 kg	1	1000 MPa	0,25 / 0,30

BOLINE BRASS – MS-EDM wire, made by bedra

Coil type	Fill weight	VPE coil	Available tensile strength	Dimensions
K160	8 kg	2	500 / 1000 MPa	0,20 / 0,25 / 0,30
K200	16 kg	1	500 / 1000 MPa	0,20 / 0,25 / 0,30
K250	25 kg	1	1000 MPa	0,25
K355	45 kg	1	1000 MPa	0,25 / 0,30
P5	5 kg	4	1000 MPa	0,25
P10	10 kg	2	1000 MPa	0,20 / 0,25 / 0,30
P15	20 kg	1	1000 MPa	0,25 / 0,30

Coated erode wire

gapstar® ONE – Neue Generation der Hochleistungsdrähte mit patentierter bedra TRIMPAC Technologie

Coil type	Fill weight	VPE coil	Available tensile strength	Dimensions
B8	8 kg	2	400 / 500 / 1000 MPa	0,20 (nur 1000) / 0,25 / 0,30 (nur 1000)
B16	16 kg	1	400 / 500 / 1000 MPa	0,20 (nur 1000) / 0,25 / 0,30 (nur 1000)
K250	25 kg	1	400 / 500 / 1000 MPa	0,25 / 0,30 (nur 1000)
K355	45 kg	1	400 / 500 / 1000 MPa	0,25 / 0,30 (nur 1000)
P5	5 kg	4	400 / 500 / 1000 MPa	0,20 (nur 1000) / 0,25 / 0,30 (nur 1000)
P10	10 kg	2	400 / 500 / 1000 MPa	0,20 (nur 1000) / 0,25 / 0,30 (nur 1000)
P15	20 kg	1	400 / 500 / 1000 MPa	0,20 (nur 1000) / 0,25 / 0,30 (nur 1000)

boline H – Gamma-Phasen-Draht, made by bedra

Coil type	Fill weight	VPE coil	Available tensile strength	Dimensions
K160	8 kg	2	900 MPa	0,20 / 0,25 / 0,30
K200	16 kg	1	900 MPa	0,20 ´/ 0,25 / 0,30
K250	25 kg	1	900 MPa	0,25 / 0,30
P10	10 kg	2	900 MPa	0,20 / 0,25 / 0,30
P15	20 kg	1	900 MPa	0,25 / 0,30

boline S – Gamma-Phasen-Draht, made by bedra

Coil type	Fill weight	VPE coil	Available tensile strength	Dimensions
K160	8 kg	2	500 MPa	0,25
K200	16 kg	1	500 MPa	0,25

topas® PLUS G – Special electrode for high cutting performance in combination with highest precision on AGIE-machines

Coil type	Fill weight	VPE coil	Available tensile strength	Dimensions
B8	8 kg	2	1000 MPa	0,20 / 0,25
B16	16 kg	1	1000 MPa	0,20 / 0,25
K250	25 kg	1	1000 MPa	0,20 / 0,25

cobracut® – For conical cuts

Coil type	Fill weight	VPE coil	Available tensile strength	Dimensions
B4	4 kg	1	500 MPa	0,20 / 0,25
B8	8 kg	2	500 MPa	0,20 / 0,25
B16	16 kg	1	500 MPa	0,20 / 0,25
K250	25 kg	1	500 MPa	0,20 / 0,25

cobracut® Typ A – For highest precision

Coil type	Fill weight	VPE coil	Available tensile strength	Dimensions
B4	4 kg	1	900 MPa	0,15
B8	8 kg	2	900 MPa	0,15 / 0,20 / 0,25 / 0,30
B16	16 kg	1	900 MPa	0,20 / 0,25 / 0,30
K250	25 kg	1	900 MPa	0,25 / 0,30
K355	45 kg	1	900 MPa	0,25 / 0,30

cobracut® Typ G – For highest precision, even with large conics on toroid-guided machines

Coil type	Fill weight	VPE coil	Available tensile strength	Dimensions
B8	8 kg	2	900 MPa	0,15 / 0,20 / 0,25 / 0,30
B16	16 kg	1	900 MPa	0,20 / 0,25 / 0,30
K250	25 kg	1	900 MPa	0,20 / 0,25 / 0,30
K355	45 kg	1	900 MPa	0,30

megacut® Typ A – For highest precision

Coil type	Fill weight	VPE coil	Available tensile strength	Dimensions
K160	8 kg	2	900 MPa	0,15 / 0,20 / 0,25 / 0,30
K200	16 kg	1	900 MPa	0,20 / 0,25 / 0,30
P5	5 kg	2	900 MPa	0,15 / 0,20 / 0,25
P10	10 kg	2	900 MPa	0,20 / 0,25 / 0,30
P15	20 kg	1	900 MPa	0,20 / 0,25 / 0,30

megacut® plus – For high cutting performance at an attractive price

Coil type	Fill weight	VPE coil	Available tensile strength	Dimensions
K160	8 kg	2	900 MPa	0,25
P5	5 kg	4	900 MPa	0,25
P10	10 kg	2	900 MPa	0,25
P15	20 kg	1	900 MPa	0,25

topas® plus H – High-performance wire for Makino machines

Coil type	Fill weight	VPE coil	Available tensile strength	Dimensions
B8	8 kg	2	800 MPa	0,20 / 0,25 / 0,30
B16	16 kg	1	800 MPa	0,20 / 0,25 / 0,30 / 0,33
K250	25 kg	1	800 MPa	0,20 / 0,25 / 0,30 / 0,33
K355	45 kg	1	800 MPa	0,25 / 0,30 / 0,33
P5	5 kg	4	800 MPa	0,20 / 0,25 / 0,30
P10	10 kg	2	800 MPa	0,20 / 0,25 / 0,30
P15	20 kg	1	800 MPa	0,20 / 0,25 / 0,30

topas® plus X – For Charmilles-machines with X-technology

Coil type	Fill weight	VPE coil	Available tensile strength	Dimensions
B8	8 kg	2	500 MPa	0,25 / 0,30 / 0,33
B16	16 kg	1	500 MPa	0,25 / 0,30 / 0,33
K250	25 kg	1	500 MPa	0,25 / 0,30 / 0,33
K355	45 kg	1	500 MPa	0,30 / 0,33
P10	10 kg	2	500 MPa	0,25 / 0,30
P15	20 kg	1	500 MPa	0,25 / 0,30

broncocut® Typ X – Fast and accurate

Coil type	Fill weight	VPE coil	Available tensile strength	Dimensions
B4	4 kg	1	520 MPa	0,25
B8	8 kg	2	520 MPa	0,25 / 0,30
K125	3,5 kg	4	520 MPa	0,25
K250	25 kg	1	520 MPa	0,25 / 0,30
K355	45 kg	1	520 MPa	0,25 / 0,30
P5	4 kg	4	520 MPa	0,25 / 0,30
P10	10 kg	2	520 MPa	0,25 / 0,30
P15	20 kg	1	520 MPa	0,25 / 0,30

Fine Wire

microcut® MF2A – Für anspruchsvollste Mikroerosionsanwendungen die eine noch höhere Available tensile strength erfordern

Coil type	Länge	VPE coil	Available tensile strength	Dimensions
BK100	5000 m	1	2400 MPa	0,05 / 0,07
BK100	10.000 m	1	2400 MPa	0,05 / 0,07
B4	20.000 m	1	2400 MPa	0,07 / 0,10
B4	30.000 m	1	2400 MPa	0,07 / 0,10

microcut® CCA – Für hohe Anforderungen bei der Mikroerosion

Coil type	Länge	VPE coil	Available tensile strength	Dimensions
B4	10.000 m	1	1000 MPa	–
B4	20.000 m	1	1000 MPa	0,07 / 0,10
B4	30.000 m	1	1000 MPa	0,07 / 0,10
B4	60.000 m	1	1000 MPa	0,10

microcut® SF – Gamma-Phasen-Feinstdraht für wirtschaftliche Bearbeitung in der Mikroerosion

Coil type	Länge	VPE coil	Available tensile strength	Dimensions
B4	20.000 m	1	1200 MPa	0,07 / 0,10
B4	30.000 m	1	1200 MPa	0,07 / 0,10
B4	60.000 m	1	1200 MPa	0,10

EDM FILTER

AGIE BROTHERCHARMILLES CHMER FANUC HITACHIMAKINOMITSUBISHISEIBUSODICKSENKEROSION

Designation	Machine type	bunol	Chemo	Mann + Hummel
Filter Paper star	Makino Sodick	0311003 Dimensions:: Ø 260 x 46 x 280 mm Filtration rating: 3 – 5 µm Filter surface: 5,1 qm Flow direction: from outside to inside Differential pressure: max. 2,5 bar Connection: Center pipe Model: Paper star Weight: 2,9 kg Packaging unit: 2 piece/s	–	–
plate filter	Charmilles Agie Hansen OPS Ingersoll	0311005 Dimensions: Ø150 x 31,5 x 365 mm Filtration rating: 5 µm Filter surface: 3,80 m² Flow direction: from outside to inside Differential pressure: max. 1,5 bar Connection: Center pipe Model: plate filter Weight: 2,3 kg Packaging unit: 6 piece/s	EM 114/5 Original Chemo-Filter, Made in Germany Dimensions: Ø150 x Ø 31,5 x 365 mm Filtration rating: 5 µm Filter surface: 3,80 m² Flow direction: from outside to inside Differential pressure: max. 1,5 bar Model: Metal Weight: 2,4 kg Packaging unit: 6 piece/s	–
Filter Paper star	Charmilles Agie Chmer	0312201 Dimensions: Ø 150 x 31 x 355 mm Filtration rating: 15 µm Filter surface: 1,9 m² Flow direction: from outside to inside Differential pressure: max. 4,0 bar Connection: Center pipe Model: Paper star with Handle Weight: 1 kg Packaging unit: 6 piece/s	EM 204/15 Original CHEMO-Filter, Made in Germany Dimensions: Ø150 x Ø31,5 x 365 mm Filtration rating: 10-15 µm Filter surface: 2,20 m² Flow direction: from outside to inside Differential pressure: max. 4 bar Model: Paper Star Filter Field of application: Wire- and Sparkerosion Packaging unit: 6 St. per carton	–
Filter Paper star	Charmilles Agie Japax	0312208 Dimensions: Ø 150 x 31 x 375 mm Filtration rating: 3 – 5 µm Filter surface: 3,2 m² Flow direction: from outside to inside Differential pressure: max. 4,0 bar Connection: Center pipe Model: Paper Star with handle Weight: 1 kg Packaging unit: 4 piece/s	0312208C (EM 1204 K/5) Made in Germany Dimensions: Ø 150 x 32 x 375 mm Filtration rating: 5 µm Filter surface: 3,03 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: metal free, Plastic version Field of application: Wire- and Sparkerosion Packaging unit: 4 piece/s	H15190/16 Original Mann + Hummel Dimensions: Ø 150 x Ø 32 x 375 mm Filtration rating: 3-5 µm Filter surface: 3,1 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: metal free, Plastic version FilterWeight: 0,8 kg Packaging unit: 4 St. per carton
Filter Paper star	Charmilles Agie Seibu	0312209 Dimensions: Ø 150 x 31 x 375 mm Filtration rating: 10 µm Filter surface: 3,2 m² Flow direction: from outside to inside Differential pressure: max. 4,0 bar Connection: Center pipe Model: Paper Star with handle Weight: 1 kg Packaging unit: 4 piece/s	EM 1204 K/10 Original CHEMO-Filter, Made in Germany Dimensions: Ø 150 x Ø 31,5 x 375 mm Filtration rating: 10 µ Filter surface: 2,97 m² Flow direction: from outside to inside Differential pressure: max. 4 bar Model: metal free, Plastic version Weight: 1 kg Packaging unit: 4 St. per carton	H15190/10 Original Mann + Hummel Dimensions: Ø 150 x Ø 32 x 375 mm Filtration rating: 10 µm Filter surface: 2,8 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: metal free, Plastic version FilterWeight: 0,7 kg Packaging unit: 4 St. per carton
Filter Senkerosion Mitsubishi	Mitsubishi Senkerosion	0311004 Dimensions: Ø300 x 300 mm, Connection G3/4″ N3-AL inklusive Filtration rating: 10 µm Filter surface: 7,54 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: Metal Packaging unit: 2 piece/s	EM 174/5 Original Chemo-Filter Made in Germany Dimensions: Ø300 x 300 mm, Connection G3/4″ F61 Filtration rating: 5 µm Filter surface: 6,62 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: Metal Packaging unit: 1 St

The conductivity of water takes on a crucial key role in the erosion of wire. This is because if the conductivity is not constant due to lower quality, the characteristics change with regard to spark discharge between the electrode and the workpiece. These altered characteristics can lead to the part being produced is no longer alongside of outside of the tolerance margin to be created. In order to ensure the greatest possible safety for you, we solely deliver new resins.

Together with our long-term supplier Purolite Deutschalnd GmbH, we have succeeded in developing a premium resin exclusively for HGH, which will provide the user with a substantial extension of service life.

For 95 % of the application cases our premium Harz MB58 is used. If however highly precise cuts are necessary in the area of hard metal processing, we recommend that you use our special resin MB400. This one-way combination resin distributes the percentage parts of anions and cations differently, which has a positive effect on the conductivity of water in hard metal processing.

The delivery is made in 25l containers

SPARE PARTS

FANUC MAKINOMITSUBISHI SODICK

OEM-No. Mitsubishi	Description	HGH Item No.
P840K000P05	Bearing Ø 7 mm Mitsubishi	2410822
P840K000P74	Bearing Mitsubishi	2450016
S649N899P14	Schwimmerschalter Mitsubishi	2450503
S684D816P08	Gas damper or tank door Mitsubishi	2410704
S684D823P14	Jet Nozzle Ceramic upper Ø 1,0 mm Mitsubishi	2410844
S684D844P68A	Wire alignment unit Mitsubishi	2450067
S684D894P09A	Cutter unit Mitsubishi	2450303
S684D898P61	Jet Nozzle upper Ceramic Ø 1,5 mm Mitsubishi	2410821
S811N724P02	Bearing one way upper 12 mm Mitsubishi	2465157
S859N219P39	Bearing Mitsubishi	2450207
S859N319P10	Bearing Mitsubishi	2410997
S859N319P31	Bearing Ø 8 x 19 x 6 mm Mitsubishi	2450201
S859N319P33	Bearing Ø 7 mm Mitsubishi	2450200
S913N313P11	Wave washer Mitsubishi	2450063
S922N040P07	Retaining ring Mitsubishi	2410849
S932N047P03	Oil Seal Mitsubishi	2450256
S932N420P14	O-Ring Mitsubishi	2465153
S932N420P20	O-Ring 20,0 x 2,0 mm Mitsubishi	2410601
X052B040G64	Diamond guide upper & lower Ø 0,205 mm Mitsubishi	2410216
X052B040G65	Diamond guide upper & lower Ø 0,255 mm Mitsubishi	2410217
X052B040G66	Diamond guide upper & lower Ø 0,305 mm Mitsubishi	2410218
X052B054G53	Diamond guide upper & lower Ø 0,205 mm Mitsubishi	2410015
X052B054G54	Diamond guide upper & lower Ø 0,255 mm Mitsubishi	2410020
X052B054G55	Diamond guide upper & lower Ø 0,305 mm Mitsubishi	2410030
X052B092G54	Diamond guide lower Ø 0,21 mm Mitsubishi	2410185
X052B092G55	Diamond guide lower Ø 0,26 mm Mitsubishi	2410195
X052B092G56	Diamond guide lower Ø 0,31 mm Mitsubishi	2410197
X052B102G52	Diamond guide upper Ø 0,155 mm Mitsubishi	2410371
X052B102G53	Diamond guide upper Ø 0,205 mm Mitsubishi	2410365
X052B102G54	Diamond guide upper Ø 0,255 mm Mitsubishi	2410370
X052B102G55	Diamond guide upper Ø 0,305 mm Mitsubishi	2410375
X052B123G52	Diamond guide upper Ø 0,155 mm Mitsubsihi	2465124
X052B123G55/B123G55	Diamond guide upper Ø 0,305 mm Mitsubishi	2410510
X052B166G51	Isolation plate lower Mitsubishi	2450101
X052B176G52	Diamond guide ceramic lower 0,155 mm Mitsubsihi	2465123
X052B240G52/B123G53	Diamond guide upper Ø 0,205 mm Mitsubishi	2410500
X052B240G53/B123G54	Diamond guide upper Ø 0,255 mm Mitsubishi	2410505
X052B243G63	Diamond guide lower Ø 0,105 mm Mitsubishi	2410540
X052B243G64	Diamond guide lower Ø 0,155 mm Mitsubishi	2410545
X052B243G65/B387G55	Diamond guide lower Ø 0,255 mm Mitsubishi	2410550
X052B387G51	Diamond guide lower Ø 0,210 mm Mitsubishi	2410191
X052B387G52	Diamond guide lower Ø 0,26 mm Mistubishi	2410570
X052B387G54	Diamond guide lower Ø 0,205 mm Mitsubishi	2410558
X052B507G54	Diamond guide lower Ø 0,205 mm Mitsubishi	2306845
X052B507G55	Diamond guide lower Ø 0,255 mm Mitsubishi	2306850
X052B507G56	Diamond guide lower Ø 0,305 mm Mitsubishi	2306846
X053C012G54	Diamond guide upper & lower Ø 0,21 mm Mitsubishi	2410240
X053C012G56	Diamond guide upper & lower Ø 0,26 mm Mitsubishi	2410245
X053C012G57	Diamond guide upper & lower Ø 0,31 mm Mitsubishi	2410250
X053C082G51	Diamond guide upper & lower Ø 0,205 mm Mitsubishi	2410202
X053C082G56	Diamond guide upper & lower Ø 0,255 mm Mitsubishi	2410206
X053C082G65	Diamond guide upper & lower Ø 0,305 mm Mitsubishi	2410203
X053C104G54	Diamond guide lower Ø 0,21 mm Mitsubishi	2410260
X053C104G55	Diamond guide lower Ø 0,26 mm Mitsubishi	2410265
X053C104G56	Diamond guide lower Ø 0,31 mm Mitsubishi	2410270
X053C136G52	Eccentric guide upper Ø 0,4 mm Mitsubishi	2411009
X053C136G54	Eccentric guide upper Ø 0,6 mm Mitsubishi	2410993
X053C137G64	Diamond guide upper Ø 0,21 mm Mitsubishi	2410236
X053C137G65	Diamond guide upper Ø 0,26 mm Mitsubishi	2410237
X053C137G66	Diamond guide upper Ø 0,31 mm Mitsubishi	2410238
X053C153G55	Diamond guide upper Ø 0,4 mm Mitsubishi	2410501
X053C162H01	Isolation plate upper Taper Cut Mitsubishi	2450104
X053C188G54	Diamond guide lower Ø 0,21 mm Mitsubishi	2410221
X053C188G55	Diamond guide lower Ø 0,26 mm Mitsubishi	2410227
X053C188G56	Diamond guide lower Ø 0,31 mm Mitsubishi	2410231
X053C241G52	Set screw upper & lower Ø 0,4 mm Mitsubishi	2450040
X053C245H02	Die Holder Diamond guide upper & lower Mitsubishi	2450025
X053C299G51	Diamond guide Center Mitsubishi	2450010
X053C314H01	Isolation plate lower Mitsubishi	2450100
X053C443H01	Isolation plate lower Mitsubishi	2450102
X053C491H01	Water nozzle lower Plastic Ø 4,0 mm Mitsubishi	2465110
X053C491H02	Water nozzle lower Plastic Ø 6,0 mm Mitsubishi	2465114
X053C491H03	Water nozzle lower Plastic Ø 8,0 mm Mitsubishi	2465115
X053C508G51	Guide upper Ø 0,35 mm Typ B Mitsubishi	2450042
X053C522G51	Pinch Pulley upper Mitsubishi	2410807
X053C522G52	Feed Pulley upper Mitsubishi	2410808
X053C524G51	Set screw upper Ø 0,4 mm Mitsubishi	2450015
X053C557G51	Die Guide upper Ø 0,5 mm Typ A Mitsubishi	2306803
X053C621H01	Water nozzle lower Ceramic Ø 4,0 mm Mitsubishi	2465105
X053C621H01	Water nozzle lower Plastic Ø 4,0 mm Mitsubishi	2465005
X053C621H02	Water nozzle lower Ceramic Ø 6,0 mm Mitsubishi	2465106
X053C621H03	Water nozzle lower Ceramic Ø 8,0 mm Mitsubishi	2465107
X053C621H03	Water nozzle lower Plastic Ø 8,0 mm Mitsubishi	2465007
X053C628G51	Set screw lower Ø 0,4 mm Mitsubishi	2450039
X053C778G51	Capstan Pulley Ceramic 32 x 57 mm Mitsubishi	2410804
X053C779G51	Pinch Pulley Ceramic 32 x 57 mm Mitsubishi	2410803
X053C834G51	Diamond guide upper Ø 0,105 mm mit AWF Mitsubishi	2410520
X053C834G52	Diamond guide upper Ø 0,155 mm mit AWF Mitsubishi	2410522
X053C834G53	Diamond guide upper Ø 0,205 mm mit AWF Mitsubishi	2410526
X053C834G54/X056C833	Diamond guide upper Ø 0,255 mm Mitsubishi	2410529
X053C884G52	Die Guide lower Ø 0,4 mm Typ D Mitsubishi	2450602
X053C884G55	Die Guide lower Ø 0,8 mm Typ D Mitsubishi	2410989
X053C920G51A/X053C82	Aspirator lower Mitsubishi	2450152
X053C920G82	Sensor with Head Mitsubishi	2456144
X054D027H02	Ceramic tube Mitsubishi	2450046
X054D125H03/H05	Power feed upper & lower 7 x 22 mm Mitsubishi	2306825
X054D129H04	Power feed lower 7 x 22 mm Mitsubishi	2306805
X054D162G54	Set screw upper Ø 0,4 mm Mitsubishi	2450020
X054D171G54	Die Guide A upper Ø 0,4 mm Mitsubishi	2450044
X054D185G51	Isolation plate lower Mitsubishi	2450112
X054D186H03	Power feed upper & lower 10 x 6 x 8 mm Mitsubishi	2306821
X054D190H03	Guide upper L=50 mm Mitsubishi	2465165
X054D199H01	Power feed upper 2,9 x 16 mm Mitsubishi	2306827
X054D209H11	Water nozzle lower Ceramic Ø 4,0 mm Mitsubishi	2465211
X054D209H11	Water nozzle lower Plastic Ø 4,0 mm Mitsubishi	2465111
X054D209H12	Water nozzle lower Ceramic Ø 6,0 mm Mitsubishi	2465019
X054D209H13	Water nozzle lower Ceramic Ø 8,0 mm Mitsubishi	2465113
X054D216H01	Power feed upper 2,9 x 16 mm Mitsubishi	2306828
X054D256G51	Capstan Pulley Ceramic lower 18 x 57 mm Mitsubishi	2410847
X054D257G51	Pinch Pulley Ceramic lower 18 x 57 mm Mitsubishi	2410845
X054D345H01	Power feed upper 2,5 x 3 x 27,5 mm Mitsubishi	2306800
X054D345H02 TIN coat	Power feed upper 2,5 x 3 x 27,5 mm Mitsubishi	2306802
X054D412G53	Capstan Pulley Ceramic upper 25 x 57 mm Mitsubishi	2410801
X054D413G51	Pinch Pulley Ceramic upper 25 x 57 mm Mitsubishi	2410802
X054D826H06	Jet Nozzle Ceramic upper Ø 0,5 mm Mitsubishi	2410820
X054D826H08	Jet Nozzle Ceramic upper Ø 1,0 mm Mitsubishi	2465132
X054D881H03	Water nozzle lower Plastic Ø 4,0 mm Mitsubishi	2465008
X054D881H03/H07	Water nozzle lower Ceramic Ø 4,0 mm Mitsubishi	2465108
X054D881H04	Water nozzle lower Ceramic Ø 8,0 mm Mitsubishi	2465109
X054D881H04	Water nozzle lower Plastic Ø 8,0 mm Mitsubishi	2465009
X054D881H05	Water nozzle lower Ceramic 15,0mm Mitsubishi	2465145
X054D881H07	Water nozzle Ceramic Ø 4,00 mm Mitsubishi	2465178
X054D896G51	Sub Die upper Ø 0,5 mm Typ A Mitsubishi	2450631
X054D897H01	Die holder (Feeding) upper Mitsubishi	2455022
X054D943H01	Plate spring Mitsubishi	2410705
X054D980G51	Guide Pipe Typ A Mitsubishi	2465169
X054D990H01	Power feed contact for annealing 11 x 8 x 21L Mitsubishi	2450609
X055C008G51	Pinch Pulley Steel/Ceramic 25 x 57 mm Mitsubishi	2410826
X055C009G51	Capstan Pulley Steel/Ceramic 25 x 57 mm Mitsubishi	2410824
X055C118H02	Power feed upper & lower 24,5 x 20 mm Mitsubishi	2450305
X055C538G54	Diamond guide upper Ø 0,205 mm Mitsubishi	2410555
X055C538G55	Diamond guide upper Ø 0,255 mm Mitsubishi	2306813
X055C538G56	Diamond guide upper Ø 0,305 mm Mitsubishi	2410557
X055C662G51	Pinch Pulley Ceramic 26 x 80 mm Mitsubishi	2306840
X055C663G51	Capstan Pulley Ceramic 26 x 80 mm Mitsubishi	2306839
X056C075H01 poliert	Power feed upper & lower 24,5 x 20 mm Mitsubishi	2306822HQ
X056C075H01/ poliert	Power feed upper & lower 24,5 x 20 mm Mitsubishi	2306822
X056C110G51	Isolation plate lower Mitsubishi	2450110
X056C273G51	Isolation plate lower Mitsubishi	2450108
X056C274G51	Guide upper Ø 0,4 mm Typ U Mitsubishi	2450629
X056C326G51/G52	Cutter unit Mitsubishi	2450302
X056C356G51	Isolation plate lower Mitsubishi	2450106
X056C432H01/H06/H04	Power feed upper & lower 24,5 x 20 mm Mitsubishi	2410839
X056C507G51	Guide upper Ø 0,4 mm Typ U Mitsubishi	2450628
X056C833G52	Diamond guide upper Ø 0,26 mm Mistubishi	2410574
X056C833G54	Diamond guide upper Ø 0,205 mm Mitsubishi	2410548
X056C833G56	Diamond guide upper Ø 0,305 mm Mitsubishi	2410556
X056C846G51	Guide upper Ø 0,4 mm Typ U Mitsubishi	2450605
X056C968G51	Isolation plate lower Mitsubishi	2450113
X058D054H02	Jet Nozzle Ceramic upper Ø 1,5 mm Mitsubishi	2465130
X058D054H02	Jet Nozzle Stahl/Ceramic upper Ø 1,5 mm Mitsubishi	2465116
X058D186G51/D070G51	Cutter unit Mitsubishi	2450301
X058D339G51	Capstan Pulley Ceramic 18 x 57 mm Mitsubishi	2410805
X058D340G51	Pinch Pulley Ceramic 18 x 57 mm Mitsubishi	2410806
X058D376H01	Fixed plae cutter Mitsubishi	2450300
X058D438H01	Gear Mitsubishi	2450407
X058D501H01	Gear Mitsubishi	2450404
X058D912G51/D350G52	Tension Pulley upper Mitsubishi	24010805
X058D963G51	Sub Die upper Typ B Mitsubishi	2450607
X058D975G52	Guide Pipe Mitsubishi	2465173
X058D991G51	Pulley upper Ø 14 x 12 mm Mitsubishi	2410828
X058D991G52	Pulley upper Ø 14 x 13 x 19 mm Mitsubishi	2410829
X059D050H02	Felt pad Ø 60 mm / iØ 10,5 mm Mitsubishi	2450613
X059D050H03	Felt pad Ø 70 mm / iØ 10,5 mm Mitsubishi	2450633
X059D084G51	Sub die upper Ø 0,5 mm Typ A Mitsubishi	2450606
X085C131H01	Water nozzle lower Ø 4,0 mm Mitsubishi	2306860
X085C131H02	Water nozzle lower Ø 7,0 mm Mitsubishi	2306861
X085C155H01	Water nozzle upper Ø 4,0 mm Mitsubishi	2306858
X085C155H02	Water nozzle upper Ø 7,0 mm Mitsubishi	2306859
X088D493H01	Power feed upper & lower 5 x 18 x 38 mm Mitsubishi	2306847
X174D199H02	Felt insert Ø 43 mm / iØ 10,5 mm Mitsubishi	2450600
X176C610H01	Die block lower Mitsubishi	2450054
X176C706H02	Die block upper Mitsubishi	2450053
X177B046H03	Die block lower Mitsubishi	2450057
X177B558H02	Holder die guide upper Mitsubishi	2450030
X177B713H02	Die block lower Mitsubishi	2450058
X179D323H02	Set screw upper Mitsubishi	2450052
X179D401H01	Die block lower Mitsubishi	2450056
X179D406H04	Wire guide lower Mitsubishi	2410572
X181A280G51	Die Guide lower Mitsubishi	2456349
X181A735G51	Die Guide lower Mitsubishi	2456350
X182B458H02	Die block lower	2450401
X182B893H01	Die block upper Mitsubishi	2450065
X182B995H01	Die block lower Mitsubishi	2465159
X182B995H02	Die block lower Mitsubishi	2465176
X183C378H01	Water nozzle upper Ø 4,0 mm Mitsubishi	2465001
X183C378H02	Water nozzle upper Ø 6,0 mm Mitsubishi	2465002
X183C378H03	Water nozzle upper Ø 8,0 mm Mitsubishi	2465003
X183C378H04	Water nozzle upper Ø 10,0 mm Mitsubishi	2465004
X183C439H01	Water nozzle upper Plastic Ø 4,5 mm Mitsubishi	2465015
X183C439H02	Water nozzle upper Plastic Ø 6,0 mm Mitsubishi	2465021
X183C439H03	Water nozzle upper Plastic Ø 8,0 mm Mitsubishi	2465023
X183C442H01	Ceramic roll lower Mitsubishi	2410799
X183C443H01	Water nozzle lower Plastic Ø 4,5 mm Mitsubishi	2465101
X184D271H06	Stopper lower Mitsubishi	2450055
X186C793H01	Water nozzle upper Ø 4,0 mm Mitsubishi	2465010
X186C793H02	Water nozzle upper Ø 8,0 mm Mitsubishi	2465012
X186C819H01	Die block cover Mitsubishi	2465031
X186C827H04	Capstan shaft Mitsubishi	2450250
X187B284H01	Die block upper Mitsubishi	2410721
X187B370H03	Water nozzle holder upper Mitsubishi	2450406
X187B532H01	Die block upper Mitsubishi	2450632
X187B580H01	Die block upper Mitsubishi	2450611
X187B621H01	Die block lower Mitsubishi	2306824
X189D690H04	Clamping stainless steel Mitsubishi	2450070
X193C196G51	Rubber Pulley Mitsubishi	2410848
X194D750H02	Collar Mitsubishi	2410725
X194D873H01	Wave washer Mitsubishi	2450064
X194D998H02	Rectifier Ring lower Mitsubishi	2407002
X196C131H01	Shaft for Lower Pulley Mitsubishi	2450508
X196C197H01/C451H01	Water nozzle upper Plastic Ø 4,0mm Mitsubishi	2465013
X196C451H02	Water nozzle upper Ø 8,0 mm Mitsubishi	2465998
X198D776H01	Cover lower Mitsubishi	2450061
X198D777H01	Plastic cover lower Mitsubishi	2450060
X198D838H01	Aspirator lower Mitsubishi	2450051
X199D297H02	Water cover upper Mitsubishi	2450601
X203C145H04	Aspirator Plastic Mitsubishi	2450045
X203C607H03	Lower Pulley Ceramic 40 x 22 mm Mitsubishi	2410812
X204D293H02	Ring lower Mitsubishi	2410609
X208D405H01	Holder for Power feed upper Mitsubishi	2465135
X208D528H02	Stopper lower Mitsubishi	2450616
X208D555H01	Door packing Mitsubishi	2410988
X209D212H01	Holder for Power feed lower Mitsubishi	2465134
X254D700G52	Nozzle Ceramic Mitsubishi	2410906
X258D168G54	Coupling Mitsubishi	2410899
X258D350H01	Detecling Nozzle Cutter Mitsubishi	2450041
X602B845G51	Pulley B lower Mitsubishi	2465175
X927D266H01	Nozzle spring Mitsubishi	2410701
X927D278H01	Spring upper Mitsubishi	2306804

CHEMISTRY

TOOL AND MOULD MANUFACTURING PLASTICS TECHNOLOGY

Bunol RS
Anticorrosive agent, lubricant & care product for high precision tools and moulds
Container: 500 ml Spray can
Water and gas proof layer
Ideal lubricant
Can be easy removed by wiping away
No hardening/sticking
Weitere Informationen

Bunol Solve
Cleaning agent for residue free degreasing and cleaning
Container: 500 ml Spray can
Dissolves grease, oil, tar, resins
100% degreasing and cleaning
Residue-free evaporation
The majority of paints and varnishes are not affected
Weitere Informationen

Bunol PTFE
Dry and fat free lubricant for the industry
Container: 400 ml Spray can
Excellent dry slip and release properties
Long lasting release agent
Heat-resistant up to 260°C
No freezing
Weitere Informationen

Bunol Multi S
Multi function spray for industry, home and hobby
Container: 500 ml spray can
Perfect temporary corrosion protection
Excellent oxide solvent
Outstanding creeping medium
Very good cleaner for oils and greases
Weitere Informationen

Bunol 35
Acid Cleaner for burnt-on residue
Container: 10 l Canister
Efficient cleaning of the machine and guides
Mild odour
Can be diluted up to 1:10 depending on level of contamination
Removes limescale deposites effortlessly
Does not contain hydrochloric acid
Weitere Informationen

Bunol AR
Biodegradable cleaning concentrate
Container: 20 l Canister

Bunol 100
EDM corrosion protection dielectric (Ready to use)
Container: 10 l Canister
dielectric for surface protection during the spark-erosive machining
no harmful effect on the environment
easily biodegradable
free from nitrites, phosphates, amines, silicates and borates
reduces silting or biofilm formation

Bunol 1000 conc
EDM-anti-corrosion additive (Concentrate)
Container: 10 l Canister
additive for surface protection during the spark-erosive machining
no harmful effect on the environment
easily biodegradable
free from nitrites, phosphates, amines, silicates and borates
reduces silting or biofilm formation

Wirasol 1 Liter
EDM Machine Cleaner
Container: 1 l can

Wirasol 10 Liter Container
EDM Machine Cleaner
Container: 10 l Canister

Surface-Shield 400 ml
rust dissolver, anticorrosive
Container: 400 ml spray can

Surface-Shield 10 Liter Container
rust dissolver, anticorrosive
Container: 10 l Canister

Bunol PL
PH-adjusted additive to maintain and clean the inner plastification unit.
Container: 1 l dosing bottle
Removes burning residues, dassing coating and color residue.
Protect against dirt and corrosion
Prevent sophisticated mechanical cleaning.
Fit for nearly all kinds of synthetic granuels

Bunol RS
Anticorrosive agent, lubicant & care product for high precision tools and moulds
Container: 500 ml spray can
Water and gas proof layer
Ideal lubricant
Can be easy removed by wiping away
No hardening/sticking
Weitere Informationen

Bunol CL-H
to remove stain and gassing residues from the warm cavity of your plasticinjection-moulding-machine
Container: 500 ml spray can
Removes deposits from tool without causing any essential interruption of production
High separating force
Ferrous and aluminum compatible
Mild odor
High flash point
Free of all CMR components
Containing no CFCs

Bunol CL-C
to remove stain and gassing residues from the cold mould of your plasticinjection-moulding-machine
Container: 500 ml spray can
Removes deposits from cold moulds
High separating force
No corrosive effect on metal surface
Mild, technical odor
Free of halonized and aromatic solvents
Containing no CFCs

Bunol RL-NO
for a perfect eject for all kind of plastic injection moulding parts
Container: 500 ml spray can
Excellent adhesion to metallic surface
Perfect parting performance
No corrosive effect on metal surface
Mild, technical odor
Containing no SILICONE
Containing no CFCs

Bunol RL-SI
for a perfect eject for all kind of plastic injection moulding parts
Container: 500 ml spray can
Excellent adhesion to metallic surfaces
Perfect parting performance
No corrosive effect on metal surface
Mild, technical odor
Containing SILICONE
Containing no CFCs

Bunol AR
Biodegradable cleaning concentrate
Container: 20 l Canister

ELECTRODES

START HOLE ELECTRODES SINKER ELECTRODES THREAD ELECTRODES

Copper Single-Channel
Length: 300 mm or 400 mm
Diameter: 0,2 – 3,0 mm
Minimum Order: 1 VE à 20 Piece

Copper Multi-Channel
Length: 300 mm or 400 mm
Diameter: 0,5 – 1,5 mm
Minimum Order: 1 VE à 20 Piece

Brass Single-Channel
Length: 300 mm or 400 mm
Diameter: 0,2 – 3,0 mm
Minimum Order: 1 VE à 20 Piece

Brass Multi-Channel
Length: 300 mm or 400 mm
Diameter: 0,5 – 1,5 mm
Minimum Order: 1 VE à 20 Piece

Dies Guide (16×12)
Diameter: 0,5 – 3,0 mm
Minimum Order: 1 Piece

Precision ceramic guides
Diameter: 0,5 – 3,0 mm
Minimum Order: 1 Piece

TS-Guide
Diameter: 0,5 – 3,0 mm
Minimum Order: 1 Piece

Collet for Bohrteufel
Minimum Order: 1 Piece

Rubber seal
Diameter: 0,2 – 3,0 mm
Minimum Order: 1 VE à 10 Piece

Drill Chuck D. 0-3 mm with Aufnahme
Quick Release z.B. für Charmilles HD8/HD10
Heun S-26

Dielektrikum Witol BT

Drill Set
– 1 Collet
– 1 Pressure Piece
– 10 Rubber seals

CLAMPING SYSTEM HIRSCHMANN 4000

Designation	Description
Basis Set 4000	The Basic Set is the economy-priced version of the Basic Set 4000 plus. Expanding the set is possible at any time. Contents: 2 Basic B-beams B 40.. series, with fastening screws 2 Cross Q-beams Q 42.. series 3 Support Plates H 4366 1 M-Clamper H 4300 1 Clamping Jaw Set H 2850
Basis Set 4000 plus	The HIRSCHMANN Basic Set plus is the ideal equipment for Wire EDM machine. Expanding the set is possible at any time. Contents: 2 Basic B-beams with fastening screws 2 Cross Q-beams Q 42..2 Adjustable End Stops H 4320 3 Support Plates H 4366 1 M-Clamper H 4300 1 Beam Vise Kit consisting of: 1 End stop H 4312 and 1 Clamper H 4312.1
B 40.. Basic Beam	Hardened basic beams, fastened to the machine’s base with screws, are used to guide and position the cross Q-beams. The Adjustable End Stop H 4320 positioned in steps of 25 mm (0.980) to serve as a reference stop for the Q-beams, the Clamper H 4300 and Adapter H 4380. The beams are available in steps of 50 mm (1.97”). Length and hole pattern of the fastening screws are matched to the machine model in question.
H 4320 Adjustable End Stop	The Adjustable End Stop is used on basic beams for repetitive positioning of cross beams. Positioning and repetitive accuracy <0.002 mm (0.00008")..
Q 42.. Cross Beam	The movable cross Q-beam can be inserted between the basic beam from the top or from the side and can be clamped in any position. Workpieces mounted directly on the Q-beams, can be adjusted by means of two adjustment screws. Larger workpieces weighing up to 150 kg (330.75 lbs) can be clamped with the assistance of the Support Plates H 4366. To avoid collision of the lower wire guide with the supporting plate, the cross Q-beam can be mounted 6 mm (0.24″) higher by inserting the “Z” height spacers. Cross beams having a length of more than 600 mm (240) are delivered with a larger cross-section (36 x 85 mm) (1.41″ x 3.34″) instead of 30 x 60 mm (1.18″ x 2.36″), to avoid sagging of the beam because of the large length.
QD 42.. Cross Beam	This cross QD-beam can be equipped on both sides with clamping elements and is often used as third beam between standard cross beams.
Q 42 KLI Insulating clamping element	For insulating the Cross beams from the Basic beam.If used, the current connection wire must be directly supplied to the workpiece.
H 4366 Support Plate	Support plates are attached to the cross beams and used for clamping or supporting larger workpieces between two cross Q-beams. The support surface is variable between 4 mm (0.16″) and 25 mm (0.98″). Workpieces are clamped by clamping jaws of the Clamping Jaw Set H 2850. Maximum load 50 kg (110.23 lbs).
H 4255 Insulating set (3 pcs)	Each consisting of two ceramic insulating plates, that can be put between a workpiece and the cross Q-beam and support plate H 4366, and one insulated clamping jaw. Current must be directly supplied to the workpiece.
H 4315 Supporting holder (3 pcs)	Supporting holders can be mounted to the cross Q-beams to hold especially thin round and rectangular workpieces. Work pieces are adjusted with the levelling adjusting device of cross beams. Maximum load 3 0 kg (66.15 lbs).
H 4315.1 Supporting holder (2 pcs)	Similar to H 4315 but with straight surface, fits for rectangular workpieces up to 10 mm (0.39″) thickness. Changeable lateral stop included. Maximum load 3 0 kg (66.15 lbs.)
H 4265 Countersupport	For supporting workpieces ranging free into cutting area. Countersupport is adjusted directly on machine table. Level of workpieces is adjustable by 6 mm (0.24″) spacers. Workpiece can be adjusted with three setscrews located in the workpiece support.
H 2850 Clamping Jaw Set	The clamping Jaw Set consists of clamping jaws, support, bolts M6 length 20–40 mm (0.787″–1.575″), setscrews M6 and also open-end M6 and internal-hexagon wrenches. Delivered in plastic box.
H 2851 Clamping Jaw Set	Similar to H 2850 but M8.
Beam Vise Kit consisting of: H 4312 Solid Jaw, H 4312.1 Clamper	For collision-free clamping of parallel workpieces direcly on the cross beam. Larger cylindrical workpieces are clamped against the second cross beam using the bevelled faces (secured by the Adjustable End Stop H 4320). The presetting of the workpiece should be done on a granite surface plate. Max. workpiece weight of parallel workpieces with a max. depth of 130 mm (5.12″) 30 kg (66.15 lbs) Max. workpiece weight with support plate at opposite cross beam 100 kg (220.46 lbs) Max. workpiece weight of cylindrical parts against second cross beam, with 2 end stops 3 0 kg (66.15 lbs)
H 4331L Clamping Beam	Clamping beam with long threaded rods
H 4332 Set of Vee Blocks (2 pcs)	For clamping cylindrical workpieces with the Clamping Beam H 4331. Preliminary setting of the workpiece should be done on the granite surface plate.
PALLETS WITH UNIVERSAL HOLDERS	The Pallet System can be used in combination with a Basic Set or as a palletized solution for single or multiple parts of small or medium-size. First, the universal holder of choice is fastened securely to a pallet. The pallet with the holder is then mounted and secured (via manual turning a single screw or by pneumatics) to a clamper which is permanently mounted to a pre-setting station. The workpieces are clamped in universal holders and are precisely adjustable via a 3D-pallet. The pallet, holder and workpiece can be transported via hand or with robotic devices to a clamper on the machine tool table.
CHARACTERISTICS	■ Workpiece weight up to 30 kg (66.15 lbs) ■ ≤ 0.002 mm (0.00008) repetitive accuracy ■ Rust-proof ■ Crash-free clamping of workpieces ■ Secure and precise set-ups on external presetting station ■ Manual and automatic pallet change ■ Useable on all EDMs
3-D PALLET CHARACTERISTICS	■ For holder and workpieces weights up to 30 kg (66.15 lbs) ■ Wide range of adjustment (0.5 mm/0.0197″ on a length of 80 mm/3.152″) ■ Quick and secure adjustment in X-, Y- and Z-direction ■ Vibration free even under high flushing pressure ■ Z-surfaces for Z = zero position are insulated against dust ■ Quick and easy zero positioning ■ Low profil construction allows optimal clearance with upper wire guide ■ Cross-hair prism centering not effected by heat ■ Rear surface ground parallel to prism for adjusting 3rd axis
H 4300 B-Beam Clamper (manual)	Manual clamper for the precise clamping of the M-Pallets H4005, H4105 and 3D-Pallets, through X & Y centering prisms and separate Z-supports. Central clamping with bolt M8. The manual clamper is provided with a securing latch for collision-free positioning of the pallets with aligned workpieces. This clamper or also several clampers are screwed with three screws on the B-beam, at any position in steps of 25 mm (~1″). Permissible workpiece weight, incl. workpiece holder 3 5 kg (77.17 lbs) Positioning and repetitive accuracy < 0.002 mm (0.00008")
H 4000 M-Clamper (manual)	Manual clamper with the same features as the H4300, but mounts to the machine table. Front surface is ground for axis alignment. The securing latch is equipped with two positioning pins which make the manual positioning of the pallets easier. Permissible workpiece weight incl. workpiece holder 3 5 kg (77.17 lbs) Positioning and repetitive accuracy <0.002 mm (0.00008")
H 4100 P-Clamper (pneumatic)	Pneumatic clamper with central power clamping for the automatic or manual positioning of the H4105 Pallets and H 4110 P 3D-Pallets. The pneumatic clamper is provided with a securing latch for collision-free positioning of the pallets with aligned workpieces during manual operation. This clamper is also used for automatic workpiece change with EROBOT Workpiece Changer or other robotic devices. Permissible workpiece weight incl. workpiece holder 3 5 kg (77.17 lbs) Positioning/repetitive accuracy < 0.002 mm (0.00008") Compressed air min. 6 bars
H 4100A Covering for P-Spanner	Covers the P-clamper against dirt during operation inside EDM.
H 4101 Pneumatic Control Unit	Manual control unit (valve) to activate functions (opening, clamping, cleaning) of Pneumatic clamper H4100.
H 4005 M-Pallett	For automatic and manual changing of workpieces. Fits to P-Clamper but also to B-Beam Clamper and M-Clamper. Two axis levelling is standard. ounting of holders similar to H4005. Max. workpiece weight, workpiece holder included 3 0 kg (66.15 lbs) Pallet weight 1.5 kg (3.30 lbs)
H 4105 P-Pallett	For manual changing of workpieces. Fits only to B-Beam Clamper H4300 and M-Clamper H 4000. Two axis levelling is standard. All workpiece holders of System 4000 can be mounted to the pallet. Max. workpiece weight, workpiece holder included 3 0 kg (66.15 lbs)
H 4110 M 3D-Pallet (for M-Clamper) H 4110 P 3D-Pallet (for P-Clamper)	For manual and automatic changing of workpieces. Fits to P-Clamper and also to “B”-Beam and M-Clamper. Three axis levelling is standard, quick and easy workpiece alignment in X, Y and Z direction. Most efficient when used on Presetting Work Station H4900 or Presetting Cube H4905 (see page 29) Max. workpiece weight, workpiece holder included 3 0 kg (66.15 lbs) Pallet weight 2.2 kg (4.8 lbs)
H 4260 Pallet Extension Unit	The workpiece holder can be extended by 45 mm (1,76″). Recommended for use of vise H4620.2.
H 4620.2 “Mighty” Mini Vise	Small “Toolmakers” vise for workpieces up to 100 x 60 x 12 mm (3.94 x 2.36 x 0.47″). End stop is positioned for securing various workpiece sizes. No reference bore. Clamping range 0–100 mm (0–3.94″) Maximum workpiece weight with max, depth of 60 mm (2.362″) 3 kg (6.6 lbs) Weight of the vise 1.9 kg (4.2 lbs)
H 4620.3 “Mighty” Thin Vise	The sturdy “Toolmakers” vise provides collision-free horizontal clamping of square or rectangular parallel workpieces. Clamping jaw and end stop can be positioned anywhere along the scale. End stop can be turned around to clamp cylindrical parts in the horizontal Vee blocks. Reference bore in the end stop helps to indicate position of the workpiece. The distance from the center of the bore to the contact surface is engraved on the vise. Clamping range 0-160 mm (0″–6.299″) Max. workpiece weight 5 kg (11.0 lbs) Weight of the Vise 2.5 kg (5.50 lbs)
H 4620 “Mighty” Vise	Same design as for H 4620.3, but for larger workpieces with more weight. Clamping range 0-160 mm (0″–6.299″) Max. workpiece weight 15 kg (33 lbs) Weight of the vise 3 kg (6.60 lbs)
H 4620.1 “Mighty” Vise	Same design as for H 4620, but for workpieces with more weight. Clamping range 0-160 mm (0″–6.299″) Max. workpiece weight 3 0 kg (66.15 lbs) Weight of the vise 4,5 kg (9.90 lbs)
H 4620.DI Spacer (2 pcs)	Allows clamping of two or three workpieces into Vice H 4620.
H 4620.1DI	Spacer for vice H 4620.1
H 4620.3DI	Spacer for vice H 4620.3
H 4630 Prism Holder (4 pcs.)	For clamping cylindrical or rectangular workpieces up to Øw 30 mm (1.182″). The holder can be mounted in horizontal or vertical position on all pallets and via these it can be fixed on all clampers. It can also be mounted directly on the cross beam. Weight 2 kg (4.41 lbs)
H 4631 Prism Vise (Crawdad Claw)	Same design as for H 4630, but for a larger clamping range and for a larger workpiece weight. Clamping range Ø 15–160 mm (0.59–6.299″) Maximum workpiece weight 15 kg (33 lbs) Weight of the prism vise 3 kg (6.61 lbs)
H 4635 Prism Holder	For clamping cylindrical workpieces from Ø 15 to 50 mm (0.59 to 1.97″). Weight 2 kg (4.41 lbs)
H 4636 Prism Holder	Similar to H 4635 but with clamping range Ø 40 to 110 mm (1.576 to 5.91″
H 4640 Prism Holder (4 pcs.)	For clamping cylindrical or rectangular workpieces up to Øw 30 mm (1.182″). The holder can be mounted in horizontal or vertical position on all pallets and via these it can be fixed on all clampers. It can also be mounted directly on the cross beam. Weight 2 kg (4.41 lbs)
H 4536 Vertical Vise	For mounting flat workpieces, up to 25 mm (0.985) in height. With end stops on the side. To avoid collision with the lower wire nozzle, the height of the workpiece support can be adjusted by using the distance plate (6 mm/0.236″). Clamping range 0–25 mm (0.985″) Max. workpiece weight 7 kg (15.44 lbs) Weight of the chuck jaw 1.4 kg (3.0 lbs)
H 4537 Clamping Insert	Via clamping insert H 4537.E clamping height of vertical vise H 4537 can be increased to 60 mm (2.364″). Delivered as set with 2 inserts.)
H 4537.E Clamping Insert	Via clamping insert H 4537.E clamping height of vertical vise H 4537 can be increased to 60 mm (2.364″). Delivered as set with 2 inserts.
H 4538 Vertical Vise	For mounting workpieces, up to 115 mm (4.53″) in height. With end stops on the side. Workpiece support can be adjusted to overhang 9 mm (0.355″), 15,5 mm (0.61″) or 22 mm (0.867″). To avoid collision with the lower wire nozzle, the height of the workpiece support can be adjusted by using the distance plate (6 mm/0.236″). Clamping range 20–115 mm (0.79–4.53″) Max. workpiece weight 3 0 kg (66.15 lbs) Weight of the chuck jaw 4.7 kg (10.36 lbs)
H 4538.E Clamping Insert	Via clamping insert H 4538.E clamping height of vertical vise H 4538 can be increased to 160 mm (6.3″). Delivered as set with 2 inserts.
H 4230 Small Uni-Holder	This universal workpiece holder can be used for clamping and positioning round, square or rectangular workpieces in the cutting area of the machine. It is customary to clamp the workpieces outside the machine, on the Presetting Work Station H 4900 or on the Presetting Cube H 4905, and to align them there. To avoid collision with the lower wire nozzle, the workpiece support can be adjusted by using the distance plate (6 mm/0.24″ dia.). Like all workpiece holders, the uniholder can be used for automatic machine loading with the Pallets H 4105. Max. permissible workpiece weight 3 kg (6.61 lbs) Weight of the uniholder depends on parts used 1–1.3 kg (2.20–2.86 lbs)
H 4231 Large Uni-Holder	Same design as for H 4230, but for larger workpieces. To avoid collision with the lower wire nozzle, the workpiece support can be adjusted by using the distance plate (6 mm/0.24″ dia.). Max. permissible workpiece weight 12 kg (26.5 lbs) Weight of the uniholder depends on parts used 2.1–3.5 kg (4.62–7.71 lbs)
H 4232 Mini-Holder	Universal holder for small workpieces. Similar design as for the uniholders. An additional small support holder with Aluminium Support Plates H 4232.1 is used for small workpieces up to 35 x 35 mm (1.38″ x 1.38″) to be bonded to and for their peripheral machining. The Single-package System H 50 K is to be used for bonding. To avoid collision with the lower wire nozzle, the workpiece support can be adjusted by using the distance plate (6 mm/0.24″). Weight of the Mini-Holder depends on parts used approx. 1 kg (2.20 lbs) Delivery includes 5 Aluminium Support Plates H 4232.1.
H 4232.1 Aluminium Support Plates (5 pcs.)	Additional aluminium support plates for the support holder of the Mini-Holder H 4232.
H 4225 Clamping Angle	Universal holder for collision-free clamping of rectangular and cylindrical workpieces with a weight up to 30 kg. To avoid collision with the lower wire nozzle, the workpiece support can be adjusted by using the distance plate (6 mm/0.24″). Max. workpiece size 220×180 mm/Ø 200 mm (8.7×7.1″/ Ø 7.9″) Weight approx. 3 kg (6.60 lbs)
H 4270 Magnet Holder	Universal Magnetholder for kollision-free clamping of rectangular workpieces. Holding force 50 N/cm2 Weight approx. 5 kg
H 4233 Basic Holder	This Basic Holder is the small version of the cross beam. It is placed with a pallet directly on the Clamper. For example, Beam Vise Kit can be mounted to front surface. The presetting of the workpiece should be done on a granite surface plate or on the presetting work station. Max. workpiece weight of parallel workpieces with a maximum depth of 130 mm (5.12″) 3 0 kg (66.15 lbs) Weight of the Basic Holder 6 kg (13.23 lbs)
Beam Vise Kit consisting of: H 4312 Solid Jaw, H 4312.1 Clamper	For collision-free clamping of parallel workpieces directly on the cross beam. Larger cylindrical workpieces are clamped against the second cross beam using the bevelled faces (secured by the Adjustable End Stop H 4320). The presetting of the workpiece should be done on a granite surface plate. Max. workpiece weight of parallel workpieces with a max. depth of 130 mm (5.12″) 30 kg (66.15 lbs) Max. workpiece weight with support plate at opposite cross beam 100 kg (220.46 lbs) Max. workpiece weight of cylindrical parts against second cross beam, with 2 end stops 30 kg (66.15 lbs)
H 4331 Clamping Beam	For collision-free clamping of rectangular workpieces and, supplemented by the set of Vee blocks, also for collision-free clamping of cylindrical workpieces, directly on the cross beam/basic holder. If a Uniholder H 4231 is provided, the clamping beam is not required, as these parts are already contained in the uniholder. Max. permissible workpiece weight 8 kg (17.64 lbs)
H 4331L Clamping Beam	Clamping beam with long threaded rods
H 4332 Set of Vee Blocks (2 pcs.)	For clamping cylindrical workpieces with the Clamping Beam H 4331. Preliminary setting of the workpiece should be done on the granite surface plate.
H 4202 Pallett Clamper	For clamping pallets and electrode holders of the Fixturing System 5000 for Sinking EDMs. Can be mounted on the face side of a M- or P-Pallet, vertically or horizontally to a Swivelling Unit H4420, to the Vertical Unit H4410 and to the Adapter H4421. The position of Vee block center to the exterior surfaces is engraved on the face but can also be found with the Reference Pallet H4203. Weight. 1.3 kg (2.9 lbs)
H 4410 Vertical Unit	Vertical unit with variable height adjustment is used with Pallets H4005, H4105 or H4110 M/P. A Swivelling Unit H4420, a Pallet Clamper H 4202 (vertically and horizontally) or an Adapter H 2495 can be mounted to the front surface. Adjustment range: 6 5 mm (2.56″) Weight: 1.7 kg (3.7 lbs)
H 4416 Sine Bar	For precise setting of the Swivelling Unit H4420.
H 4420 Swivelling/Indexing Unit	Mountable directly to the Vertical Unit H4410, the Adapter H4421 or to the Pallet H4005, H 4105 and H4110. A Pallet Clamper H4202 or an Adapter H2495 can be mounted to the front surface. Indexing range: ± 90° in 5° steps Indexing accuracy: ≤ 10’ Continuously swivelling range 360° (Can be set and locked via the vernier scale. For precise setting use Sine Bar H 4416) Weight: 2 kg (4.4 lbs)
H 4421 Mounting Angle	The H4421 is the link between the machine table and a Swivelling/Indexing Unit H4420, a Pallet Clamper H 4202 or an Adapter H2495. Weight: 1,3 kg
H 2495 Adapter	The adapter is the link between the Vertical Unit H4410, the Swivelling Unit H4420 or the Mounting Angle H4421 and all holders of the Fixturing System 4000.
H 4203 Reference Pallet	For determining the central position of the Pallet Clamper H4202 and of A-Axes with manual or pneumatic clamper.
H 5.50R Pallett	Rust-proof pallet 50 x 50 mm (1.97 x 1.97″) without Clamping Journal, for mounting electrodes and workpieces.
H 8.88R Pallett	Rust-proof pallet 88 x 88 mm (3.46 x 3.46″) without Clamping Journal, for mounting electrodes and workpieces.
H 5.611R- Clamping Journal (stainless) H 5.611.1R Centering Bush (stainless)	For clamping of pallets and holders in the H 4202 Pallet Clamper and in the H 8.. series clamper of the Fixturing System 5000.
H 6.611R- Clamping Journal (stainless)	For clamping the pallets and holders in the H 6.. series clamper of the Fixturing System 5000
H 4206 Shaft Clamping Chuck	For mounting and precise indexing and clamping of the electrode shafts of Fixturing System 5000. The chuck fits, like all other pallets and electrode holders of System 5000, to Pallet Clamper H 4202. Weight: 2 kg (4.4 lbs)
H 4246 MINIFIX-Holder	For direct mounting of MINIFIX- and MINIFIXplus electrodes of System 5000 on a Wire EDM. The holder fits on Pallets H 4005, H 4105 and H 4110M/P, but can also be attached to the Vertical Unit H 4410 and the Swivelling Unit H 4420. Weight: 1 kg, (2.2 lbs)
H 4900 Presetting Work Station	The presetting work station is delivered complete in a sturdy stainless steel trolley and a granite surface plate 500 x 500 mm (19.7″ x 19.7″) of accuracy class 00. A Clamper H 4000 is mounted on the granite plate on a riser. A small reference column (same height is the riser) used to support the workpieces while presetting them is also included. The opposite guide beam, aligned parallel to the clamper, serves as a reference wall for the surface gauge. Dimensions (WxDxH) approx. 680 x 580 x 1100 mm (26.972″ x 22.852″ x 43.34″).
H 4900.1 Presetting Work Station	Similar to H 4900, but without the guide beam. 3rd axis is adjusted by positioning the pallet to the rear.
H 4901.1 Presetting Work Station	Similar to H 4901, but without the guide beam. 3rd axis is adjusted by positioning the pallet to the rear.
H 4905 Presetting Cube	Granite presetting cube is used on a larger granite plate together with the reference column. Includes the H 4000 clamper and the reference column. It can be placed on two sides ground to the H 4000, and is suitable for presetting small workpieces. Dimensions (WxDxH) approx. 150 x 150 x 200 mm (5.91″ x 5.91″ x 7.88″)

Sinker EDM
Wire EDM
Starting block EDM
24 hours delivery service
Own delivery in NRW
Over 4.000 articles
Well-known manufacturers
All from one hand
Proven quality

Designation	Machine type	bunol	Chemo	Mann + Hummel
Filter cartridge White	–	0320028 Filter cartridge for Agie, Charmilles, Makino Dimensions: 65 x 250 mm Filtration rating: 5 µm „without grooves“ Packaging unit 1 piece/s	–	–
Filter cartridge White	–	0320028.R Filter cartridge for Agie, Charmilles, Makino Dimensions: 65 x 250 mm Filtration rating: 5 µm „with groove“ Packaging unit 1 piece/s	–	–
Plate filter Hansen / OPS Ingersoll	Agietron (50, 100, 200, 300) (1, 2, 3, 4, 5, 6) U Agieeloxmondo (20, 30) Agietoron Integral (2, 3)	0311005 Dimensions: Ø150 x 31,5 x 365 mm Filtration rating: 5 µm Filter surface: 3,80 m² Flow direction: from outside to inside Differential pressure: max. 1,5 bar Connection: Center pipe Model: plate filter Weight: 2,3 kg VE: 6 piece/s	EM 114/5 Original Chemo-Filter, Made in Germany Dimensions: Ø150 x Ø 31,5 x 365 mm Filtration rating: 5 µm Filter surface: 3,80 m² Flow direction: from outside to inside Differential pressure: max. 1,5 bar Model: Metal Weight: 2,4 kg VE: 6 piece/s	–
Plate filter Agie / Charmilles / Japax	Agiecut (100D, 150, 200D, 250, 300D) Evolution (2, 3) DEM (215, 250, 315,7 00) AC Progress (VP2, VP3, VP4)	0312208 Dimensions: Ø 150 x 31 x 375 mm Filtration rating: 3 – 5 µm Filter surface: 3,2 m² Flow direction: from outside to inside Differential pressure: max. 4,0 bar Connection: Center pipe Model: Paper Star with handle Weight: 1 kg VE: 4 piece/s	0312208C (EM 1204 K/5 schwarz) Made in Germany Dimensions: Ø 150 x 32 x 375 mm Filtration rating: 5 µm Filter surface: 3,03 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: metal free, Plastic version Field of application: Wire- and Sparkerosion Packaging unit: 4 piece/s	H15190/16 Original Mann + Hummel Dimensions: Ø 150 x Ø 32 x 375 mm Filtration rating: 3-5 µm Filter surface: 3,1 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: metal free, Plastic version FilterWeight: 0,8 kg Packaging unit: 4 St. per carton
Plate filter Agie / Charmilles	Agiecut (100D, 150, 200D, 250, 300D) Evolution (2, 3) DEM (215, 250, 315, 700) AC Progress (VP2, VP3, VP4)	0320003 Dimensions: Ø 150 x 31 x 364 mm Filtration rating: 3 – 5 µm Filter surface: 3,23 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: Center pipe Model: Metal FilterWeight: 1,6 kg Packaging unit: 4 piece/s	–	H15475 Original Mann + Hummel Dimensions: Ø 150 x Ø 32 x 364 mm Filtration rating: 3 – 5 µm Filter surface: 4,7 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: Metal FilterWeight: 1,7 kg Packaging unit 4 St. per carton

Designation	Machine type	bunol	Chemo	Mann + Hummel
Filter cartridge White	–	0320028 Filter cartridge for Agie, Charmilles, Makino Dimensions: 65 x 250 mm Filtration rating: 5 µm „without grooves“ Packaging unit 1 piece/s	–	–
Filter cartridge White	–	0320028.R Filter cartridge for Agie, Charmilles, Makino Dimensions: 65 x 250 mm Filtration rating: 5 µm „with groove“ Packaging unit 1 piece/s	–	–
Plate filter Hansen / OPS Ingersoll“	ROBOFORM (20, 30, 40, 41, 100 ,200, 400,810, 2000, 4000, 7010, 8010, 9010, 22, 35, 35P), ELERODA (110, 220, 430)	0311005 Dimensions: Ø150 x 31,5 x 365 mm Filtration rating: 5 µm Filter surface: 3,80 m² Flow direction: from outside to inside Differential pressure: max. 1,5 bar Connection: Center pipe Model: plate filter Weight: 2,3 kg VE: 6 piece/s	EM 114/5 Original Chemo-Filter, Made in Germany Dimensions: Ø150 x Ø 31,5 x 365 mm Filtration rating: 5 µm Filter surface: 3,80 m² Flow direction: from outside to inside Differential pressure: max. 1,5 bar Model: Metal Weight: 2,4 kg VE: 6 piece/s	–
Plate filter Agie / Charmilles / Japax	AM370, Robofil (100, 200, 290, 310, 330, 400, 510, 600, 1020, 2020, 4020, 6020,1030, 2030, 4030, 6030)	0312208 Dimensions: Ø 150 x 31 x 375 mm Filtration rating: 3 – 5 µm Filter surface: 3,2 m² Flow direction: from outside to inside Differential pressure: max. 4,0 bar Connection: Center pipe Model: Paper Star with handle Weight: 1 kg VE: 4 piece/s	0312208C (EM 1204 K/5 schwarz) Made in Germany Dimensions: Ø 150 x 32 x 375 mm Filtration rating: 5 µm Filter surface: 3,03 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: metal free, Plastic version Field of application: Wire- and Sparkerosion Packaging unit: 4 piece/s	H15190/16 Original Mann + Hummel Dimensions: Ø 150 x Ø 32 x 375 mm Filtration rating: 3-5 µm Filter surface: 3,1 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: metal free, Plastic version FilterWeight: 0,8 kg Packaging unit: 4 St. per carton
Plate filter Agie / Charmilles	Roboform (20, 30, 40, 41, 100, 200, 400, 810, 2000, 4000, 7010 ,8010, 9010), Eleroda (110, 220, 430)	0312201 Dimensions: Ø 150 x 31 x 355 mm Filtration rating: 15 µm Filter surface: 1,9 m² Flow direction: from outside to inside Differential pressure: max. 4,0 bar Connection: Center pipe Model: Paper star with Handle Weight: 1 kg VE: 6 piece/s	EM 204/15 Original CHEMO-Filter, Made in Germany Dimensions: Ø150 x Ø31,5 x 365 mm Filtration rating: 10-15 µm Filter surface: 2,20 m² Flow direction: from outside to inside Differential pressure: max. 4 bar Model: Paper starFilter Field of application: Wire- and Sparkerosion Packaging unit: 6 St. per carton	–
Plate filter Seibu	AM370, Robofil (100, 200, 290, 310, 330, 400, 510, 600, 1020, 2020, 4020, 6020, 1030, 2030, 4030, 6030)	0312209 Dimensions: Ø 150 x 31 x 375 mm Filtration rating: 10 µm Filter surface: 3,2 m² Flow direction: from outside to inside Differential pressure: max. 4,0 bar Connection: Center pipe Model: Paper Star with handle Weight: 1 kg VE: 4 piece/s	EM 1204K/10 Original CHEMO-Filter, Made in Germany Dimensions: Ø 150 x Ø 31,5 x 375 mm Filtration rating: 10 µ Filter surface: 2,97 m² Flow direction: from outside to inside Differential pressure: max. 4 bar Model: metal free, Plastic version Weight: 1 kg Packaging unit: 4 St. per carton	H15190/10 Original Mann + Hummel Dimensions: Ø 150 x Ø 32 x 375 mm Filtration rating: 10 µm Filter surface: 2,8 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: metal free, Plastic version FilterWeight: 0,7 kg Packaging unit: 4 St. per carton
Plate filter Agie / Charmilles	AM370, Robofil (100, 200, 290, 310, 330, 400, 510, 600, 1020, 2020, 4020, 6020, 1030, 2030, 4030, 6030)	0320003 Dimensions: Ø 150 x 31 x 364 mm Filtration rating: 3 – 5 µm Filter surface: 3,23 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: Center pipe Model: Metal FilterWeight: 1,6 kg Packaging unit: 4 piece/s	–	H15475 Original Mann + Hummel Dimensions: Ø 150 x Ø 32 x 364 mm Filtration rating: 3 – 5 µm Filter surface: 4,7 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: Metal FilterWeight: 1,7 kg Packaging unit 4 piece/s per carton
Plate filter Charmilles	ROBOFIL (240CC, 440CC, 640CC, 240SL, 440SL, 2050TW, 6050TW), CUT (200, 300, 400)	0312026A (0312029MEK/0312029FEK) Dimensions: Ø 340 x 450 mm Filtration rating: 3 – 5 µm Flow direction: from outside to inside Differential pressure: max. 2,5 bar Connection: Central nipple Model: Metal, powder coated Weight: 7,8 kg VE: 2 piece/s	EM 691/5 P Original Chemo-Filter, Made in Germany Dimensions: Ø 340 x GA x 440 mm Filtration rating: 5 µm Filter surface: 20,4 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: Plug connection Model: Metal, powder coated	H342240/40 H342090 KIT Plastic version Original Mann + Hummel Dimensions: Ø 340 x 450 mm Filtration rating: 3-5 µm Filter surface: 22,4 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: G 3/4 “ Model: Metal mit Packaging unit FilterWeight: 11,8 kg Packaging unit 1 St. per carton
Plate filter Fanuc Alpha / Sodick/ Charmilles	A300W, A320D, A350, A350W, A350S, A350SS, A350SSW, A500, A530D, A600W, A750W, A1000W, BF250, BF275, BF280L, BF320L	0311008 Dimensions: Ø 340 x 46 x 450 mm Filtration rating: 3 – 5 µm Filter surface: 12,8 m² Flow direction: from outside to inside Differential pressure: max. 3,0 bar Connection: Center pipe Model: Metal, powder coated Weight: 6,2 kg VE: 2 piece/s	171/5 P Original Chemo-Filter, Made in Germany Dimensions: Ø340 x 47 x 420 mm Filtration rating: 3-5 µm Filter surface: 17,35 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: Metal, powder coated Weight: 10,7 kg	H341158/40 H341790 Plastic version Original Mann + Hummel Dimensions: Ø 340 x 46 x 450 mm Filtration rating: 3-5 µm Filter surface: 14,5 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: Metal Weight: ca. 8,8 kg Packaging unit: 1 St. per carton

Designation	Machine type	bunol	Chemo	Mann + Hummel
Plate filter Fanuc/Sodick	Model: O, P, Q, R, S, T, V Mate: W0, W1, W2, W3 α-0B, α-1B, α-0C, α-1C	0311007 Dimensions: Ø 340 x 46 x 300 mm Filtration rating: 3 – 5 µm Filter surface: 13,02 m² Flow direction: from outside to inside Differential pressure: max. 2,2 bar Connection: Center pipe Model: Metal, powder coated Weight: 5,95 kg Packaging unit: 2 piece/s	EM 163/5 Original CHEMO-Filter, Made in Germany Dimensions: Ø 340 x 47 x 306 mm Filtration rating: 5 µm Filter surface: 14,58 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: Metal Weight: 9,5 kg	H341070/40 H341290/3 Plastic version Original Mann + Hummel Dimensions: Ø 340 x Ø 45,5 x 300 mm Filtration rating: 3 – 5 µm Filter surface: 10,7 m², single bellow technology Flow direction: from outside to inside Differential pressure: max. 3 bar Model: Metal Connection: Center pipe Weight: 6,4 kg Packaging unit: 1 St. per carton
„Cleanstar“ Filter Fanuc/Sodick	Model: O, P, Q, R, S, T, V Mate: W0, W1, W2, W3 α-0B, α-1B, α-0C, α-1C	0311001-UT Made by OSHITARI Dimensions: 340 x 46 x 300 mm Filtration rating: 1 – 2 µm Filter surface: 14,5 m² Differential pressure: max. 2,5 bar Flow direction: from outside to inside Made in Japan powder coated, corrosion resistant Weight: 3,5 kg Packaging unit 2 piece/s	EM 411/3 Original Chemo-Filter, Made in Germany Dimensions: Ø340 x 47 x 306 mm Filtration rating: 1-2 µm Filter surface: 16,10 m² Differential pressure: max. 3 bar Flow direction: from outside to inside Connection: Center pipe Filter fabric: synthetic fleece Model: Metal	–
„Cleanstar“ Filter Fanuc/Sodick	Model: O, P, Q, R, S, T, V Mate: W0, W1, W2, W3 α-0B, α-1B, α-0C, α-1C	0311001-UTK Dimensions: Ø 340 x 46 x 300 mm Filtration rating: 1 – 2 µm Filter surface: 15 m² Flow direction: from outside to inside Differential pressure: max. 3,0 bar Connection: Center pipe Model: Metal, powder coated Weight: 6,5 kg Packaging unit: 2 piece/s	EM 411/3 Original Chemo-Filter, Made in Germany Dimensions: Ø340 x 47 x 306 mm Filtration rating: 1-2 µm Filter surface: 16,10 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: Center pipe Model: Metal Filter fabric: synthetic fleece	–
Plate filter Fanuc / Hitachi / Makino / Mitsubishi / Seibu	α-0iB, 1iB, 0ice, 1ice, 0icp, 0icp5, 0ic5, 1ic5, 0ic, 1ic	0312024-G34 (0312024A) Dimensions: Ø 340 x 300 mm Filtration rating: 3 – 5 µm Filter surface: 13,6 m² Flow direction: from outside to inside Differential pressure: max. 2,2 bar Connection: central nipple Model: Metal, powder coated Weight: 6,3 kg Packaging unit 2 piece/s	EM 670/5 P Original Chemo-Filter, Made in Germany Dimensions: Ø340 x Ø76 x 300 mm Filtration rating: 3-5 µm Filter surface: 12 m² Flow direction: from outside to inside, Differential pressure: max. 3 bar Connection: Plug connection Model: Metal, powder coatedEM 670/5 MV Mantel Vlies	H341390 Original Mann + Hummel Dimensions: Ø 340 x 300 mm Filtration rating: 3 – 5 µm Filter surface: 13,5 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: G 3/4 “ Model: metal free, Plastic with double bellows Weight: 6,4 kg Packaging unit: 1 St. per carton
„Cleanstar“ Filter Fanuc Alpha	α-0iB, 1iB, 0ice, 1ice, 0icp, 0icp5, 0ic5, 1ic5, 0ic, 1ic	0312024A-UTK Made by OSHITARI Dimensions: 340 x 300 mm Filtration rating: 1 – 2 µm Filter surface: 17 m² Differential pressure: max. 3 bar Flow direction: from outside to inside Made in Japan powder coated / corrosion resistant Weight: 4,4 kg Packaging unit 2 piece/s	EM 401/3 Original Chemo-Filter, Made in Germany Dimensions: Ø 340 x NA x 300 mm Filtration rating: 1-2 µm Filter surface: 16,10 m² Differential pressure: max. 3 bar Flow direction: from outside to inside Connection: Plug connection Filter fabric: synthetic fleece Model: Metal	H341480/14 KIT Original Mann + Hummel Dimensions: Ø 340 x 300 mm Filtration rating: 1 – 2 µm Filter surface: 14,9 m² Differential pressure: max. 3 bar Flow direction: from outside to inside Connection: G 3/4 “ Model: long-life, W-Falte Metal, powder coated Weight: 8,5 kg Packaging unit: 1 St. per carton
„Cleanstar“ Filter Fanuc Alpha	α-0iB, 1iB, 0ice, 1ice, 0icp, 0icp5, 0ic5, 1ic5, 0ic, 1ic	0312024A-UT Made by OSHITARI Dimensions: 340 x 300 mm Filtration rating: 1 – 2 µm Filter surface: 17 m² Differential pressure: max. 3 bar Flow direction: from outside to inside Made in Japan powder coated / corrosion resistant Weight: 4,4 kg Packaging unit 2 piece/s	EM 401/3 Original Chemo-Filter, Made in Germany Dimensions: Ø 340 x NA x 300 mm Filtration rating: 1-2 µm Filter surface: 16,10 m² Differential pressure: max. 3 bar Flow direction: from outside to inside Connection: Plug connection Filter fabric: synthetic fleece Model: Metal	H341480/14 KIT Original Mann + Hummel Dimensions: Ø 340 x 300 mm Filtration rating: 1 – 2 µm Filter surface: 14,9 m² Differential pressure: max. 3 bar Flow direction: from outside to inside Connection: G 3/4 “ Model: long-life, W-Falte Metal, powder coated Weight: 8,5 kg Packaging unit: 1 St. per carton
„Cleanstar“ Filter Fanuc Alpha	α-0iB, 1iB, 0ice, 1ice, 0icp, 0icp5, 0ic5, 1ic5, 0ic, 1ic	0312024A-UTK Dimensions: Ø 340 x 340 mm Filtration rating: 1 – 2 µm Filter surface: 17 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: Central nipple Model: Metal, powder coated Weight: 7 kg Packaging unit: 2 piece/s	EM 401/3 Original Chemo-Filter, Made in Germany Dimensions: Ø 340 x NA x 300 mm Filtration rating: 1-2 µm Filter surface: 16,10 m² Differential pressure: max. 3 bar Flow direction: from outside to inside Connection: Plug connection Filter fabric: synthetic fleece Model: Metal	H341480/14 KIT Original Mann + Hummel Dimensions: Ø 340 x 300 mm Filtration rating: 1 – 2 µm Filter surface: 14,9 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: G 3/4 „, Model: long-life, W-Falte Metal, powder coated Weight: 8,5 kg Packaging unit: 1 St. per carton
Plate filter Fanuc Alpha / Sodick/ Charmilles	MODEL (O,P,Q,R,S,T,V). TAPECUT(W0, W1) TAPECUT (W2,W3,W4). CUTMATE, CUT-αOA	0311008 Dimensions: Ø 340 x 46 x 450 mm Filtration rating: 3 – 5 µm Filter surface: 12,8 m² Flow direction: from outside to inside Differential pressure: max. 3,0 bar Connection: Center pipe Model: Metal, powder coated Weight: 6,2 kg Packaging unit: 2 piece/s	EM 171/5 P Original Chemo-Filter, Made in Germany Dimensions: Ø340 x 47 x 420 mm Filtration rating: 3-5 µm Filter surface: 17,35 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: Metal, powder coated	H341158/40 H341790 Plastic version Original Mann + Hummel Dimensions: Ø 340 x 46 x 450 mm Filtration rating: 3-5 µm Filter surface: 14,5 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: Metal Weight: ca. 8,8 kg Packaging unit: 1 St. per carton
Plate filter Fanuc	Alpha 600	0312026A Dimensions: Ø 340 x 450 mm Filtration rating: 3 – 5 µm Flow direction: from outside to inside Differential pressure: max. 2,5 bar Connection: Central nipple Model: Metal, powder coated Weight: 7,8 kg Packaging unit: 2 piece/s	EM 700/3 EM 700/3 P powder coated Original Chemo-Filter, Made in Germany Dimensions: Ø340 x 400 mm Filtration rating: 1-2 µm Flow direction: from outside to inside Differential pressure: max. 3 bar	–
„Cleanstar“ Filter Fanuc Alpha	Alpha 600	0312026A-UT Made by OSHITARI Dimensions: 340 x 450 mm Filtration rating: 1 – 2 µm Filter surface: 26 m² Differential pressure: max. 3 bar Flow direction: from outside to inside powder coated / corrosion resistant Gesicht: 7,3 kg / piece/s Packaging unit 2 piece/s	EM 700 EM 700 P powder coated Original Chemo-Filter, Made in Germany Dimensions: Ø340 x 400 mm Filtration rating: 1-2 µm Flow direction: from outside to inside Differential pressure: max. 3 bar	–
„Cleanstar“ Filter Fanuc Alpha	Alpha 600	0312026A-UTK Dimensions: Ø 340 x 450 mm Filtration rating: 1-2 µm Flow direction: from outside to inside Differential pressure: max. 2,5 bar Connection: Central nipple Model: Metal, powder coated Weight: 8,2 kg Packaging unit: 2 piece/s	EM 700 EM 700 P powder coated Original Chemo-Filter, Made in Germany Dimensions: Ø340 x 400 mm Filtration rating: 1-2 µm Flow direction: from outside to inside Differential pressure: max. 3 bar	–

Designation	Machine type	bunol	Chemo	Mann + Hummel
Plate filter Makino / Mitsubishi / Hitachi	Q Series H-CUT (3,4,5,6,8,3HP,203) Q	0312022 Dimensions: Ø 300 x 29 x 250 mm Filtration rating: 3 – 5 µm Filter surface: 8,1 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: Center pipe, Side nipple Model: Metal, powder coated Weight: 4 kg Packaging unit: 2 piece/s	–	–
Plate filter Fanuc / Hitachi / Makino / Mitsubishi / Seibu	CUT203F2, 203R ,203Y, 254, 254RS, 254RH, 254Y, 355, 355R, 355RS 355RH, 355Y	0312024-G34 (0312024-KC/-KS) Dimensions: Ø 340 x 300 mm Filtration rating: 3 – 5 µm Filter surface: 13,6 m² Flow direction: from outside to inside Differential pressure: max. 2,2 bar Connection: central nipple Model: Metal, powder coated Weight: 6,3 kg Packaging unit: 2 piece/s	EM 670/5 P Original Chemo-Filter, Made in Germany Dimensions: Ø340 x Ø76 x 300 mm Filtration rating: 3-5 µm Filter surface: 12 m² Flow direction: from outside to inside, Differential pressure: max. 3 bar Connection: Plug connection Model: Metal, powder coated EM 670/5 MV Mantel Vlies	H341390 Original Mann + Hummel Dimensions: Ø 340 x 300 mm Filtration rating: 3 – 5 µm Filter surface: 13,5 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: G 3/4 “ Model: metal free, Plastic with double bellows FilterWeight: 6,4 kg Packaging unit: 1 St. per carton
„Cleanstar“ Filter Hitachi / Makino / Mitsubishi	CUT203F2, 203R ,203Y, 254, 254RS, 254RH, 254Y, 355, 355R, 355RS, 355RH, 355Y	0312024-UT Dimensions: 340 x 300 mm Filtration rating: 1 – 2 µm Filter surface: 14,5 m² Flow direction: from outside to inside Differential pressure: max. 2,5 bar Model: Metal – plastic lid and base powder coated / corrosion resistant Made in Japan Weight: 3,2 kg Packaging unit: 2 piece/s	EM 401/3 Original Chemo-Filter, Made in Germany Dimensions: Ø 340 x NA x 300 mm Filtration rating: 1-2 µm Filter surface: 16,10 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: Plug connection Filter fabric: synthetic fleece Model: Metal	H341480/14 KIT H341490/14 KIT Plastic version Original Mann + Hummel Dimensions: Ø 340 x 300 mm Filtration rating: 1 – 2 µm Filter surface: 14,9 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: G 3/4 „, Model: long-life, W-Falte Metal, powder coated FilterWeight: 8,5 kg Packaging unit: 1 St. per carton
„Cleanstar“ Filter Hitachi / Makino / Mitsubishi	CUT203F2, 203R ,203Y, 254, 254RS, 254RH, 254Y, 355, 355R, 355RS, 355RH, 355Y	0312024-UTK Dimensions: Ø 340 x 340 mm Filtration rating: 1 – 2 µm Filter surface: 17 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: Central nipple Model: Metal, powder coated Weight: 7 kg VE: 2 piece/s	EM 401/3 Original Chemo-Filter, Made in Germany Dimensions: Ø 340 x NA x 300 mm Filtration rating: 1-2 µm Filter surface: 16,10 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: Plug connection Filter fabric: synthetic fleece Model: Metal	H341480/14 KIT H341490/14 KIT Plastic version Original Mann + Hummel Dimensions: Ø 340 x 300 mm Filtration rating: 1 – 2 µm Filter surface: 14,9 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: G 3/4 „, Model: long-life, W-Falte Metal, powder coated FilterWeight: 8,5 kg Packaging unit: 1 St. per carton
„Cleanstar“ Filter Hitachi / Makino / Mitsubishi	CUT203F2, 203R ,203Y, 254, 254RS, 254RH, 254Y, 355, 355R, 355RS, 355RH, 355Y	0312024-UTK300 Dimensions: Ø 340 x 300 mm Filtration rating: 1 – 2 µm Filter surface: 15 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: Central nipple Model: Metal, powder coated Weight: 6,5 kg VE: 2 piece/s	EM 401/3 Original Chemo-Filter, Made in Germany Dimensions: Ø 340 x NA x 300 mm Filtration rating: 1-2 µm Filter surface: 16,10 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: Plug connection Filter fabric: synthetic fleece Model: Metal	H341480/14 KIT H341490/14 KIT Plastic versionOriginal Mann + Hummel Dimensions: Ø 340 x 300 mm Filtration rating: 1 – 2 µm Filter surface: 14,9 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: G 3/4 „, Model: long-life, W-Falte Metal, powder coated FilterWeight: 8,5 kg Packaging unit: 1 St. per carton

Designation	Machine type	bunol	Chemo	Mann + Hummel
Filter cartridge White	–	0320028 Dimensions: 65 x 250 mm Filtration rating: 5 µm „without grooves“ Packaging unit: 1 piece/s	–	–
Filter cartridge White	CUT203F2, 203R ,203Y, 254, 254RS, 254RH, 254Y, 355, 355R, 355RS, 355RH, 355Y	0320028.R Dimensions: 65 x 250 mm Filtration rating: 5 µm „with groove“ Packaging unit: 1 piece/s	–	–
Plate filter Sodick / Seibu / Makino SEM	ED22	0312116 Dimensions: Ø150 x Ø 73 x 455 mm Filtration rating: 15 µm Filter surface: 2,45 m² Flow direction: from outside to inside Differential pressure: max. 2 bar Connection: Center pipe Model: Paper star Weight: 1,3 kg Packaging unit: 6 piece/s	EM 130/15 Original Chemo-Filter, Made in Germany Dimensions: Ø150 x Ø 37 x 455 mm Filtration rating: 15 µm Filter surface: 2,73 m² Flow direction: from outside to inside Differential pressure: max. 2 bar Model: Metal Packaging unit: 2 St. per carton	–
Plate filter Makino / Sodick	EC(3025, 3040, 3141, 7050, 3141S, 108), EA3040	0311003 Dimensions: Ø 260 x 46 x 280 mm Filtration rating: 3 – 5 µm Filter surface: 5,1 qm Flow direction: from outside to inside Differential pressure: max. 2,5 bar Connection: Center pipe Model: Paper star Weight: 2,9 kg Packaging unit: 2 piece/s	–	H26644/20 Original Mann + Hummel Dimensions: Ø 261 x Ø 46 x 280 mm Filtration rating: 3 – 5 µm Filter surface: 5,4 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: Metal FilterWeight: 3,7 kg Packaging unit: 1 St. per carton
Plate filter Makino / Yougar	EE-3, 6, 6L, EQ-5, EH-3, 6, EQH-5, EQF-5, MUQ-32, MU-43	0312022 Dimensions: Ø 300 x 29 x 250 mm Filtration rating: 3 – 5 µm Filter surface: 8,1 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: Center pipe, Side nipple Model: Metal, powder coated Weight: 4 kg Packaging unit: 2 piece/s	–	–
Plate filter Makino / Mitsubishi	EE-3, 6, 6L, EQ-5, EH-3, 6, EQH-5, EQF-5, MUQ-32, MU-43	0312020 Dimensions: Ø 300 x 500 mm Filtration rating: 3 – 5 µm Filter surface: 16,36 qm Flow direction: from outside to inside Differential pressure: max. 2,2 bar Connection: central nipple Model: Metal, powder coated Weight: 6,2 kg Packaging unit: 2 piece/s	EM 550/5 Original Chemo-Filter, Made in Germany Dimensions: Ø300 x 47/NA x 500 mm Filtration rating: 3-5 µm Filter surface: 15,17 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: Plug connection Model: Metal	H311680-14 KIT Original Mann + Hummel Dimensions: Ø 302 x 501 mm Connection: G 3/4 “ Filtration rating: 3 – 5 µm Filter surface: 17,4 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: Metal, corrosion resistant FilterWeight: 7,6 kg Packaging unit: 1 St. per carton
Plate filter Makino / Mitsubishi	EE-3, 6, 6L, EQ-5, EH-3, 6, EQH-5, EQF-5, MUQ-32, MU-43	0312020-KS Dimensions: Ø 300 x 29 x 500 mm Filtration rating: 3 – 5 µm Filter surface: 16,2 qm Flow direction: from outside to inside Differential pressure: max. 2,2 bar Connection: Center pipe, Side nipple G3/4″ Model: Metal, powder coated Weight: 6,2 kg Packaging unit: 2 piece/s	EM 550/5 Original Chemo-Filter, Made in Germany Dimensions: Ø300 x 47/NA x 500 mm Filtration rating: 3-5 µm Filter surface: 15,17 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: Plug connection Model: Metal	H311033/20 Original Mann + Hummel Dimensions: Ø 302 x 503 mm Filtration rating: 3 – 5 µm Filter surface: 9,9 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: Metal FilterWeight: 6,6 kg Packaging unit: 1 St. per carton
Plate filter Fanuc / Hitachi / Makino / Mitsubishi / Seibu	EC-32, EC-64, ECQ-53, U-53, U-32, U-53K, U-32K, SP43, SP-64, EU64	0312024-G34 (0312024-KC/-KS) Dimensions: Ø 340 x 300 mm Filtration rating: 3 – 5 µm Filter surface: 13,6 m² Flow direction: from outside to inside Differential pressure: max. 2,2 bar Connection: central nipple Model: Metal, powder coated Weight: 6,3 kg Packaging unit: 2 piece/s	EM 670/5 P Original Chemo-Filter, Made in Germany Dimensions: Ø340 x Ø76 x 300 mm Filtration rating: 3-5 µm Filter surface: 12 m² Differential pressure: max. 3 bar Flow direction: from outside to inside, Connection: Plug connection Model: Metal, powder coatedEM 670/5 MV Mantel Vlies	H341390 Original Mann + Hummel Dimensions: Ø 340 x 300 mm Filtration rating: 3 – 5 µm Filter surface: 13,5 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: G 3/4 “ Model: metal free, Plastic with double bellows FilterWeight: 6,4 kg Packaging unit: 1 St. per carton
„Cleanstar“ Filter Hitachi / Makino / Mitsubishi	EC-32, EC-64, ECQ-53, U-53, U-32, SP43, SP-64, EU64	0312024-UT Made by OSHITARI Dimensions: 340 x 300 mm Filtration rating: 1 – 2 µm Filter surface: 14,5 m² Differential pressure: max. 2,5 bar Flow direction: from outside to inside Model: Metal – plastic lid and base powder coated / corrosion resistant Made in Japan Weight: 3,2 kg Packaging unit: 2 piece/s	EM 401/3 Original Chemo-Filter, Made in Germany Dimensions: Ø 340 x NA x 300 mm Filtration rating: 1-2 µm Filter surface: 16,10 m² Differential pressure: max. 3 bar Flow direction: from outside to inside Connection: Plug connection Filter fabric: synthetic fleece Model: Metal	H341480/14 KIT H341490/14 KIT Plastic version Original Mann + Hummel Dimensions: Ø 340 x 300 mm Filtration rating: 1 – 2 µm Filter surface: 14,9 m² Differential pressure: max. 3 bar Flow direction: from outside to inside Connection: G 3/4 „, Model: long-life, W-Falte Metal, powder coated FilterWeight: 8,5 kg Packaging unit: 1 St. per carton
„„Cleanstar“ Filter Hitachi / Makino / Mitsubishi	EC-32, EC-64, ECQ-53, U-53, U-32, SP43, SP-64, EU64	0312024-UTK300 Dimensions: Ø 340 x 300 mm Filtration rating: 1 – 2 µm Filter surface: 15 m² Differential pressure: max. 3 bar Flow direction: from outside to inside Connection: Central nipple Model: Metal, powder coated Weight: 6,5 kg Packaging unit: 2 piece/s	EM 401/3 Original Chemo-Filter, Made in Germany Dimensions: Ø 340 x NA x 300 mm Filtration rating: 1-2 µm Filter surface: 16,10 m² Differential pressure: max. 3 bar Flow direction: from outside to inside Connection: Plug connection Filter fabric: synthetic fleece Model: Metal	H341480/14 KIT H341490/14 KIT Plastic version Original Mann + Hummel Dimensions: Ø 340 x 300 mm Filtration rating: 1 – 2 µm Filter surface: 14,9 m² Differential pressure: max. 3 bar Flow direction: from outside to inside Connection: G 3/4 „, Model: long-life, W-Falte Metal, powder coated FilterWeight: 8,5 kg Packaging unit: 1 St. per carton

EDM-TECHNOLOGY BY HGH

Filters for spark erosion; Electrodes for start hole drilling machines and counter erosion

EDM WIRE

Bare wire / Brass wire

Coated erode wire

Fine Wire

Bare wire / Brass wire

Galvanized erode wire

Coated erode wire

EDM FILTER

RESIN

SPARE PARTS

CHEMISTRY

ELECTRODES

CLAMPING SYSTEM HIRSCHMANN 4000

Description	Length
Copper Ø M2	Length 80 mm ; Thread 50 mm
Copper Ø M3 – M24 mm	Length 120 mm ; Thread 80 mm
Tungsten Copper Ø M3 – M16 mm	Length 86 mm ; Thread 50 mm
Graphite Ø M4 – M12 mm	Length 75 mm ; Thread 50 mm